ATRIA Mesh 1200 Add-on | MESH1200ADDON
No items found.
No items found.
All questions
ATRIA Mesh 1200 Add-on | MESH1200ADDON
No items found.
No items found.
How can I pair my mesh nodes if they are connected to my internet gateway via Ethernet cables?
1Plug the mesh
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.
2Plug the second mesh unit
You must plug in the second mesh unit to turn it on and then connect it to the main mesh unit (LAN port) by using a RJ45 cable.
3Devices are configured
Wait a few minutes for both mesh units to detect the Internet configuration. Once the LEDs are green on both devices, they are configured.
4Remove the RJ45 cables from the secondary mesh units
You must remove the RJ45 cable from the second mesh unit and unplug it to install it in the room where you want to use it.