Repeater AX1800

No items found.

No items found.

All questions

Repeater AX1800

How do I configure my repeater as an access point ?

Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?

Which Wi-Fi frequencies (bands) does the repeater provide?

Where can I find the Wi-Fi Network Information of my repeater?

What is the best location for my repeater?

What is the IP address of my repeater?

What does the LED on the repeater mean?

What can I do in the Web UI?

What are the new Wi-Fi Networks information after the configuration?

What are the credentials to connect to the Web UI?

I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater?

I configured my repeater as an extender, but my broadband internet speed is not improved, why?

I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why?

I cannot access the Web UI with the URL (http://setup.strong) during the configuration, why ?

I cannot access the Web UI (http://setup.strong) after setting up my repeater, why?

How do I update the firmware of my repeater?

How do I set up a new administration password?

How do I set a static IP for my repeater?

How do I reset my repeater to its factory settings? (Web UI)

How do I reset my repeater to its factory settings? (Reset Button)

How do I reboot my repeater?

How do I connect to the Web UI of the repeater? (Wi-Fi)

How do I connect to the Web UI of the repeater? (RJ45 Cable)

How do I connect to the Web UI after setting up my device?

How do I connect to the WPS?

How do I configure my repeater?

How do I activate the WPS?

Can I deactivate the LEDs of my repeater ?

Repeater AX1800 UK

How do I configure my repeater as an access point ?

Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?

Which Wi-Fi frequencies (bands) does the repeater provide?

What is the best location for my repeater?

What is the IP address of my repeater?

What does the LED on the repeater mean?

What can I do in the Web UI?

What are the new Wi-Fi Networks information after the configuration?

What are the credentials to connect to the Web UI?

I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater?

I configured my repeater as an extender, but my broadband internet speed is not improved, why?

I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why?

I cannot access the Web UI with the URL (http://setup.strong) during the configuration, why ?

I cannot access the Web UI (http://setup.strong) after setting up my repeater, why?

How do I update the firmware of my repeater?

How do I set up a new administration password?

How do I set a static IP for my repeater?

How do I reset my repeater to its factory settings? (Web UI)

How do I reset my repeater to its factory settings? (Reset Button)

How do I reboot my repeater?

How do I connect to the Web UI after setting up my device?

How do I connect to the WPS?

How do I configure my repeater?

How do I activate the WPS?

Can I deactivate the LEDs of my repeater ?

Repeater AX3000

Where can I find the Wi-Fi Network Information of my repeater?

What is the IP address of my repeater?

I cannot access the Web UI with the URL (http://setup.strong) during the configuration, why ?

How do I connect to the Web UI of the repeater? (Wi-Fi)

How do I connect to the Web UI of the repeater? (RJ45 Cable)

How do I configure my repeater as an access point ?

Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?

Which Wi-Fi frequencies (bands) does the repeater provide?

What is the best location for my repeater?

What does the LED on the repeater mean?

What can I do in the Web UI?

What are the new Wi-Fi Networks information after the configuration?

What are the credentials to connect to the Web UI?

I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater?

I configured my repeater as an extender, but my broadband internet speed is not improved, why?

I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why?

I cannot access the Web UI (http://setup.strong) after setting up my repeater, why?

How do I update the firmware of my repeater?

How do I set up a new administration password?

How do I set a static IP for my repeater?

How do I reset my repeater to its factory settings? (Web UI)

How do I reset my repeater to its factory settings? (Reset Button)

How do I reboot my repeater?

How do I connect to the Web UI after setting up my device?

How do I connect to the WPS?

How do I configure my repeater?

How do I activate the WPS?

Can I deactivate the LEDs of my repeater ?

Repeater AX3000 UK

Where can I find the Wi-Fi Network Information of my repeater?

What is the IP address of my repeater?

I cannot access the Web UI with the URL (http://setup.strong) during the configuration, why ?

How do I connect to the Web UI of the repeater? (Wi-Fi)

How do I connect to the Web UI of the repeater? (RJ45 Cable)

How do I configure my repeater as an access point ?

Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?

Which Wi-Fi frequencies (bands) does the repeater provide?

What is the best location for my repeater?

What does the LED on the repeater mean?

What can I do in the Web UI?

What are the new Wi-Fi Networks information after the configuration?

What are the credentials to connect to the Web UI?

I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater?

I configured my repeater as an extender, but my broadband internet speed is not improved, why?

I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why?

I cannot access the Web UI (http://setup.strong) after setting up my repeater, why?

How do I update the firmware of my repeater?

How do I set up a new administration password?

How do I set a static IP for my repeater?

How do I reset my repeater to its factory settings? (Web UI)

How do I reset my repeater to its factory settings? (Reset Button)

How do I reboot my repeater?

How do I connect to the Web UI after setting up my device?

How do I connect to the WPS?

How do I configure my repeater?

How do I activate the WPS?

Can I deactivate the LEDs of my repeater ?

No items found.

No items found.

I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why?

It is very likely that your repeater is too far from your modem/router. We recommend configuring your repeater in the same room as your modem/router and then changing its location to a different room.

WARNING: Please note that on your repeater if the network LED is lit in grey, red,
purple or blinks in red the signal of the Wi-Fi host is too low.

Follow us