Universal Repeater 300 V2

No items found.

No items found.

All questions

Universal Repeater 300 V2

Will the MAC address-filtering settings configured on my modem/router be effective if I use Universal Repeater 300 to extend the Wi-Fi network of my modem/router?

Will the MAC address-filtering settings configured on my modem/router be effective if I use Universal Repeater 300 to extend the Wi-Fi network of my modem/router?

Which frequencies are used to create a connection between the router/modem and Universal Repeater 300?

Which Wi-Fi frequencies (bands) does Universal Repeater 300 provide?

What is the meaning of the LEDs of my repeater?

What is the best location for the Universal Repeater 300?

What is the IP address of Universal Repeater 300?

What can I do in the Web UI?

What are the credentials to access the Web UI?

I installed my Universal Repeater 300 as a Repeater, but only the Wi-Fi LED is on, why?

I installed my Universal Repeater 300 as a Repeater but my broadband Internet speed is not improved, why?

I have a guest network on my modem/router. Can I extend my router's guest network as well as the main Wi-Fi network with a Universal Repeater 300?

I cannot find my existing Wi-Fi network in the Installation Wizard of the Universal Repeater 300, why?

I cannot access the Web UI with the URL (http://strong.ap300) when I am setting up the device, why?

I cannot access the Web UI (http://strong.ap300) of my repeater after completing its setup, why?

I have configured MAC address filtering rules on my router. Can I still use the Universal Repeater 300 to extend the Wi-Fi network of my modem/router?

How do I update the firmware of my repeater?

How do I reset my repeater to its factory settings? (Web UI)

How do I reset my Universal Repeater 300 to its factory default settings? (Reset button)

How do I change the default admin password of my repeater?

How do I access the Web UI?

How do I access the Web UI after the configuration?

How can I set up Universal Repeater 300 as an Access Point?

How can I set up Universal Repeater 300 as a router?

How can I connect my device to my Universal Repeater 300 for the installation?

How can I change the settings of the repeater?

Can I change the Wi-Fi channels of Universal Repeater 300 at repeater mode?

No items found.

No items found.

How do I update the firmware of my repeater?

1Browse to the download section on https://www.strong-eu.com/

Before the update, you must go to the download section of our website to see if there is a new software version available.

2Download

To access the downloads, Click Assistance and Download in the top bar and its submenu.

3Select your product reference

Once, you have browsed to the Downloads page, click Home Networking and repeater and click the product reference.

4Firmware Section

On the page below, you will find the new software version under the firmware section.

If you do not see a firmware section on the download page, it means that there is no new software version available.

5Connect to the Web UI

Follow this procedure to connect to the Web UI.

6Setup

Click Setup.

7Upgrade Firmware

Click Upgrade Firmware.

8Select the firmware file

Select the firmware file on your device and click Apply.

Follow us