Wi-Fi 7 REPEATER 3600
All questions
Settings and features
How do I pair the repeater with my router using WPS?
WPS pairing works without the Web UI:
- Plug the repeater into a socket near your router. Wait until the Power LED is steady blue.
- Press and hold the WPS button on the side of the repeater for 5 seconds. The WPS LED starts flashing blue.
- Within 2 minutes, press the WPS button on your router or box.
- Wait for the WPS LED to turn solid blue — pairing is complete.
- Move the repeater to its final location and confirm the Wi-Fi LED is blue.
Tips: WPS pairing is only available in Wireless Extender mode. It gives you no control over the extended network name — the repeater copies the host SSID. If the WPS LED stops flashing without turning solid blue, the 2-minute window expired: restart from step 2, or use the Web UI wizard instead.
How do I restore the repeater to its factory default settings?
There are two methods:
- Via the Web UI: Advanced Settings > System > Reset > click Reset. Confirm when prompted.
- Via the physical pinhole: with the repeater powered on, insert a pin or paper clip into the Reset pinhole on the side panel and hold for about 10 seconds. The Power LED flashes to confirm the reset.
Warning: A factory reset permanently erases ALL settings: the Web UI password, Wi-Fi names, the host network connection, the timezone, and any scheduled reboot. After the reset you must run the setup wizard again. Never reset as a first troubleshooting step — try reconfiguring the host network first.
How do I schedule an automatic weekly reboot?
Go to Advanced Settings > System > Timed Reboot. Enable the function, choose the day(s) and time, and click Apply. The repeater will reboot automatically at the scheduled time. Useful for maintaining performance over weeks of continuous use.