No items found.
FHD cable receiver 3034 Free-To-Air (DE & CEE)
No items found.
All questions
No items found.
FHD cable receiver 3034 Free-To-Air (DE & CEE)
No items found.
Apps, picture and sound
No picture / no channels / 'No signal' message.
- Check the coaxial cable between your cable wall outlet and the CABLE IN connector of the receiver.
- Start a new channel search: Menu > Installation > Auto Search.
- If you know the frequency used by your cable operator, use Menu > Installation > Manual Search and check the RF Level and C/N bars: they show the quality of the signal.
If the TV shows no picture at all, check the HDMI or SCART cable, select the correct input on your TV and check that the receiver is not in standby.
The picture is not displayed correctly on my TV.
Go to Menu > System > AV Setting:
- Set TV System and Aspect Mode to 'Auto'.
- Set Video Resolution to the highest resolution supported by your TV.
Can I connect the receiver to an older TV without HDMI?
Yes. Connect the receiver to your TV with a SCART cable on the TV SCART connector on the back panel, then select the SCART input on your TV.
There is no sound.
- Press the Mute button on the remote control and check the volume (left/right arrows while watching).
- Check the volume of your TV.
- Go to Menu > System > AV Setting and set Audio Out to 'Auto'.
- If you use a sound bar or amplifier on the S/PDIF output, check that it is switched on and set to the correct input.
Can I connect a sound bar or an amplifier?
Yes. Connect your digital audio system to the coaxial S/PDIF output with a coaxial audio cable. The sound is also passed through via HDMI. Set Audio Out to 'Auto' in Menu > System > AV Setting.