No items found.
LEAP UNA | FHD Android TV with HDR10+
No items found.
All questions
No items found.
No items found.
Wi-Fi and network troubleshooting
How do I connect the LEAP-UNA to Wi-Fi?
- Go to Settings > Network & Internet.
- Enable Wi-Fi. The stick will scan for nearby networks.
- Select your network, enter the password, and select Connect.
Warning: Routers using Wi-Fi 6 with WPA3 security are not supported by the LEAP-UNA. If your router uses WPA3, switch it to WPA2 (or WPA2/WPA3 mixed mode) before connecting.
Which Wi-Fi bands does the LEAP-UNA support?
The LEAP-UNA supports dual-band Wi-Fi 5 (IEEE 802.11 a/b/g/n/ac): 2.4 GHz (802.11 b/g/n) and 5 GHz (802.11 a/n/ac). Wi-Fi 6 (802.11ax) is not supported on this model.
The Wi-Fi connection fails.
- Check the password is correct.
- If your router uses WPA3, switch it to WPA2 mode — WPA3 is not supported.
- Restart the router and retry.
- Use the HDMI extender cable to move the stick away from potential interference.
The Wi-Fi connection is unstable or slow. What can I do?
- Move the TV (and the stick) closer to your router.
- Use the HDMI extender cable to move the stick away from the TV port, which can reduce Wi-Fi interference from the TV's own electronics.
- Switch to 5 GHz if your router is close, or to 2.4 GHz for better range through walls.
- Restart your router and the LEAP-UNA (unplug and replug the power cable).