PLW600SDUOEU
All questions
Settings and features
Can I disable the Wi-Fi function of the Wi-Fi module so that it works as a simple Powerline?
After finishing the deactivation, you will be automatically disconnected from the Wi-Fi network and the web interface. All the connected devices will also be disconnected.
1Connect to the Powerline Wi-Fi network
Connect to the Wi-Fi of the Powerline.
2Browse to the web interface
Connect to the user interface of the Powerline Wi-Fi module via Wi-Fi by typing http://strong.500.ap in the address bar of your Internet browser. The interface should appear.
3Enter your credentials
Once on the home page, enter the password: admin
4WLAN Settings
Click WLAN Settings, then select Basic Settings.
5Deactivate the Wi-Fi
Clear the Enable checkbox on the Wireless line, according to your needs, and click Save.
Please note that to reactivate Wi-Fi via the module's user interface, you will have to connect via an RJ45 cable. The other solution for reactivating Wi-Fi is to reset the Powerline Wi-Fi adapter using a paper clip until the LEDs flash.
The easiest solution for your IPTV connection!
Connect your modem to your IPTV decoder with high video quality without running cables! Your modem and your IPTV decoder are not in the same room? It is not an issue. No need to run cables! The Powerline 600 Kit is the perfect solution. Connect a Powerline 600 adapter to your modem via an Ethernet cable. Then, put your IPTV decoder and your TV in the room of your choice. You only need to connect the second Powerline 600 adapter to your IPTV decoder to enjoy your live TV.