Powerline 500 Triple Pack | PL500TRI

No items found.

All questions

Powerline 500 Triple Pack | PL500TRI

Why do the Powerlines switch off on their own?

What do the icons and LEDs on the Powerline mean?

The easiest solution for your IPTV connection!

The Internet speed is much lower at the output of the powerline network compared to the speed at the output of the Internet service provider's box. Why?

Internet everywhere from any power socket!

No items found.

I do not have access to the Internet and/or the LED of the "home" icon does not light up.

You must reset the adapters to their factory settings. To reset the adapters please follow the steps below:

See more FAQs

1Connect the adapters to a powerstrip

Connect the adapters one after the other to a power strip.

Connect Powerline 500 EU adapters to a multiplug

2Connect the adapters to Internet

Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.

Connect Powerline 500 EU adapters to the Internet

3Press the "Connect & Secure" button (first device)

Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.

Press the Connect & Secure button on the first adapter

4Press the Connect & Secure button (second device)

Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.

Press the Connect & Secure button on the second adapter

5Home icon blinks on the devices

The home icon LED should start blinking.

6Devices are reset

All the LEDs must be green at the end of the operations.

Repeat the same operation for a third powerline. You can have up to eight powerline 500 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.