Powerline 600 Duo Mini UK
All questions
Powerline 600 Duo Mini UK
Powerline 600 Triple Mini UK
I do not have access to the Internet and/or the LED of the "home" icon does not light up.
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
1Plug the adapters to a power strip
Connect the adapters one after the other to a power strip.
2Connect the adapters to the Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
3Press the Connect & Secure button (first adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 15 seconds.
4Press the Connect & Secure button (second adapter)
Press the “Connect & Secure” button located on the right side of the second device for 15 seconds.
5Homr LED blinks
The home icon LED should start blinking.
6Adapters are rest
All the LEDs must be green at the end of the operations.
Repeat
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 Mini on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.