Dual Band Repeater 1200

No items found.

No items found.

All questions

Dual Band Repeater 1200

Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?

Which Wi-Fi frequencies (bands) does the repeater provide?

Where can I find the Wi-Fi Network Information of my repeater?

What is the best location for my repeater?

What is the IP address of my repeater?

What does the LED on the repeater mean?

What can I do in the Web UI?

What are the new Wi-Fi Networks information after the configuration?

What are the credentials to connect to the Web UI?

I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater

I configured my repeater as an extender, but my broadband internet speed has not improved. Why?

I cannot find my existing Wi-Fi network in the installation wizard of the repeater, Why?

I cannot access the Web UI with the URL (http://setup.strong) during the configuration, why ?

I cannot access the Web UI (http://setup.strong) after setting up my repeater, why?

How do I update the firmware of my repeater?

How do I set up a new administration password?

How do I set a static IP for my repeater?

How do I reset my repeater to its factory settings? (Web UI)

How do I reset my repeater to its factory settings? (Reset Button)

How do I reboot my repeater?

How do I connect to the Web UI of the repeater for the first time? (RJ45 Cable)

How do I connect to the Web UI of the repeater for the first time? (Wi-Fi)

How do I connect to the Web UI after settings up my device?

How do I connect to the WPS?

How do I configure my repeater?

How do I configure my repeater as an access point ?

How do I activate the WPS?

Can I deactivate the LEDs of my repeater ?

No items found.

No items found.

How do I configure my repeater as an access point ?

TIPS: Before configuring your repeater, please check the following procedure to determine the location of your repeater:

What is the best location for my repeater?

1Connect to the Web UI.

Follow one of the procedures below to connect to the Web UI:

- How do I connect to the Web UI of the repeater? (RJ45 Cable)
- How do I connect to the Web UI of the repeater? (Wi-Fi)

2Set the Time Zone

Select the Time Zone from the list if the one that is automatically detected is incorrect and click Save.

3Configure the Access Point Settings

The repeater set up wizard will open. Select LAN Bridge (AP). Then, enter the name for the Access Points. Select a security type and enter a Wi-Fi Password before clicking Apply.

4Wait for the Repeater Configuration

Please wait a few moments while the repeater completes the configuration process.

Warning: Please write down the information for the two Wi-Fi Networks. You will need this information to connect to the network.

Follow us