Credentials and Web UI access

How do I change the SSID (Wi-Fi Network Name) and Wi-Fi password? (Wi-Fi Settings)

In the Web UI, you have two ways to change the SSID (Wi-Fi Network Name) and Wi-Fi password of your router:

• By using the Quick Settings
• Or by using Wi-Fi Settings.

1Accessing the Web UI

To access the Web UI, please refer to the Web UI connexion procedure below:

• How do I access the Web UI?

2Wi-Fi Settings

Click Wi-Fi Settings in the Network Settings Section.

3Save the new network information

Click Apply to save the changes.

4Pop up message

In the pop-up message, click Yes to apply your changes.

5Write down the new network information

Write down the new network information on a piece of paper.

After changing the Wi-Fi network information all the devices that were connected to the network will be automatically disconnected.

How do I change the SSID (Wi-Fi Network Name) and Wi-Fi password? (Quick Settings)

In the Web UI, you have two ways to change the SSID (Wi-Fi Network Name) and Wi-Fi password of your router:

• By using the Quick Settings
• Or by using Wi-Fi Settings.

1Accessing the Web UI

To access the Web UI, please refer to the Web UI connexion procedure below:

• How do I access the Web UI?

2Quick Settings

In the Web UI, the Quick Settings enable you to change the information of your network: its SSID (Wi-Fi Network Name) and Wi-Fi password.

To do so, click Quick Settings in the top bar.

3APN Settings

Click Next.

4Enter the new network name

Enter the new network name and click Next.

5Enter the new Wi-Fi Password

Click Display password and enter the new password for the Wi-Fi network, then click Next.

6Save the new network information

Click Apply to save the changes.

7Write down the new network information

Write down the new network information on a piece of paper.

How do I change the admin password?

1Access the Web UI

To connect to the Web UI, please follow the guidelines written in: How do I access the Web UI?

2Modify Login Password

Once this is done, click the Modify Login Password in the top bar.

3Enter the new admin password

Enter the following information before clicking Apply:

• Current Password: Enter the current password.
• New Password: Enter the new password.
• Confirm New Password: Enter the same password as in the previous field.

4Write down the new password

Write down the new password to access the Web UI.

The new password can contain up to 32 characters including numbers, lower case, upper case, and special characters (! # $ * + , - . % : = ? @ [ ] ^ _ { |} ~).

Where is the password and SSID written?

To find the Wi-Fi password of your device, you can look at the back of the device, the information will be written.

Why is it written Limited Service in the Web UI?

There are several reasons why, the Limited-Service text is written next to the Network and Web icon.

• The main reason can be that your SIM card is protected by a PIN code that needs to be entered in the device Web UI to activate the network.
• Another reason can be that the SIM card is not inserted properly and is not detected by the device.
• It is also possible that your SIM card is detected but not automatically recognized by the device. In this case, you must connect to the Web UI and check the APN settings of your service provider. This procedure is explained in the following section: How do I check and edit the APN settings of my service provider?

Why is there a QR Code on the rear side of the router?

The QR Code located on the rear side of your router is designed to simplify your connection to the Wi-Fi. If you open your smartphone and scan the QR Code, you will be automatically connected to the Wi-Fi of your device.